top of page
Search

FT 2000 Automatic Straw Filling and Sealing Machine: One Button, Zero Learning Curve

Writer: Heyi Biotech
Heyi Biotech
2 days ago
6 min read

Short answer: The FT 2000 is a fully automatic straw filling and sealing machine built around a single start/stop button. It fills and seals 0.25 ml and 0.5 ml straws from any brand in one pass, seals ultrasonically without heat, needs no maintenance, has no wear parts, and is rated for twenty years of service. It is compact enough to sit inside a refrigerator, so pre-cooling, filling, and sealing can all happen in the cold.


Walk into most semen freezing labs, and you will find the same bottleneck: the filling and sealing station. It is the step where every straw has to be handled, where the machine has a screen with menus somebody has to be trained on, and where a poorly sealed straw becomes a failed dose six months later in a nitrogen tank.


The FT 2000 was designed by removing everything from that station that does not need to be there. No screen. No menu. No calibration routine. No wear parts to order. One button.


What Is an Automatic Straw Filling and Sealing Machine?

An automatic straw filling and sealing machine is the equipment that takes extended semen from a container and dispenses it into individual straws, then seals each straw so the dose can be frozen and stored. It sits between the dilution and equilibration stages and the programmable freezer — the point where bulk liquid becomes individual, traceable, sealed doses.


In most labs, that machine is the most complicated piece of equipment in the room. The FT 2000 is built on the opposite principle: make the machine simple enough that the operator's attention stays on the semen, not on the interface.

FT 2000 automatic straw filling and sealing machine with single start-stop button for 0.25 ml and 0.5 ml straws

Why Simplicity Is the Real Specification

A filling and sealing machine is used every production day, by whatever staff is available. Complexity is not a feature in that setting — it is a training requirement, a downtime risk, a source of operator error.


Consider what a complicated interface actually costs:

  • Training time for every new operator, and retraining after staff turnover

  • Setup errors from menu settings, parameter changes, and remembered procedures

  • Hesitation at the moment of production, when the semen is already out of the cold

  • Support dependency on whoever knows the machine best


The FT 2000 replaces all of it with a single start/stop button. Press to run, press to stop. There is no learning curve to manage, because there is nothing to learn.


Key Features of the FT 2000

One-button operation, no screen, no learning curve

The machine has one start/stop button and no complex display. An operator who has never seen the unit before can run it correctly on the first attempt. This is what makes the FT 2000 practical for small teams, seasonal staff, and farms where the person running the machine is also doing five other jobs.

Universal 0.25 ml and 0.5 ml compatibility

The FT 2000 handles both standard straw formats — 0.25 ml and 0.5 ml — and works with straws from any brand, not a single closed supply chain. You are not locked into one straw supplier to keep the machine running.

Reusable needles and tubing

The filling needle and tubing are common to both 0.25 ml and 0.5 ml formats, so there is no second set to buy or store. They can be washed, disinfected, and reused cycle after cycle — a recurring consumable turned into a durable component.

Filling and sealing in a single pass

Filling and sealing happen together, in the same operation. There is no separate sealing step, no second machine, no batch of filled-but-unsealed straws waiting on a tray. Fewer handling steps mean less time out of the cold and fewer opportunities for error.

Ultrasonic cold sealing — no heat, no sperm damage

This is the technical heart of the machine. Conventional sealing methods apply heat near the straw end, and heat near a semen straw is exactly what you do not want. The FT 2000 seals ultrasonically, without thermal input, so the dose is not exposed to the temperature spike that damages sperm membranes. Cold sealing protects the sample through the step that would otherwise be its weakest point.

Maintenance-free with no wear parts

There are no wear parts to replace and no scheduled maintenance routine to follow. In practice, that means no spare-parts inventory, no service calendar, no production stopped waiting for a component.

A twenty-year service life

The machine is rated for twenty years of service. For a lab making a first equipment purchase, that reframes the cost entirely: it is not a device that has to be replaced in a few years, but a fixed asset behind every dose the lab produces for two decades.


A Low-Cost Entry Point for a New Semen Freezing Lab

For a farm or breeding operation building its first semen freezing lab, capital cost is the constraint that decides what gets bought. The FT 2000 sits in the low thousands of US dollars — a fraction of what a large automated filling line costs — while still delivering ultrasonic cold sealing and full automation.


That combination is what makes it the natural first machine for a new lab: the technical quality of a production-grade sealer, at an entry-level price, with no ongoing maintenance cost attached.


Compact, Portable, and Cold-Room Ready

The FT 2000 is small and light enough to move. Two consequences follow, and both change how a lab can be organized:

Mobile semen production

Because the unit is portable, semen processing does not have to happen in one fixed room. A production setup can travel — to a stud station, to a collection site, to a seasonal breeding location — with filling and sealing done on site rather than after transport.

Operation inside a refrigerator

The machine can be placed inside a refrigerator and operated at low temperature. That means pre-cooling, filling, and sealing can all be carried out in the same cold environment instead of moving straws between a cold room and a warm bench. Every transfer between a cold space and a warm one is a temperature excursion; removing those transfers is one of the most direct ways to protect sample quality.


This is the point most filling machines cannot reach: they are bench instruments that assume a room-temperature workspace. The FT 2000 is built to work where the semen actually should be — cold.


Who the FT 2000 Is For

User

Why it fits

New semen freezing labs

Production-grade ultrasonic sealing at entry-level cost

Small and mid-size farms

One-button operation with no training requirement

Mobile AI and collection services

Portable unit for on-site filling and sealing

Labs standardizing on cold-chain workflow

Operates inside a refrigerator at low temperature

Operations with limited staff

No screen, no menus, no maintenance schedule

FAQ

What does the FT 2000 do?

It automatically fills and seals semen straws in one operation, handling both 0.25 ml and 0.5 ml formats from any brand.

How difficult is it to operate?

It has a single start/stop button and no complex screen. An operator can run it correctly without prior training — press to start, press to stop.

Does the sealing method damage sperm?

No. The FT 2000 uses ultrasonic cold sealing, which avoids the heat that conventional thermal sealing introduces near the straw.

Are the needles and tubing reusable?

Yes. The needle and tubing are shared between 0.25 ml and 0.5 ml formats and can be washed, disinfected, and reused repeatedly.

Does it need maintenance or spare parts?

No. The machine is maintenance-free and has no wear parts to replace.

How long does the machine last?

It is rated for twenty years of service life.

Can it be used in a cold environment?

Yes. The FT 2000 is compact enough to be placed inside a refrigerator and operated at low temperature, so pre-cooling, filling, and sealing can all take place in the cold.

How much does it cost?

It is priced in the low thousands of US dollars — an entry-level investment compared with large automated filling lines.


Conclusion: The Simplest Machine Is the One You Actually Use

A filling and sealing machine earns its place by being used every day, correctly, by whoever is on shift. The FT 2000 gets there by removing complexity rather than adding features: one button, no screen, no training, no wear parts, no maintenance schedule — plus ultrasonic cold sealing that protects the sperm at the step where heat would hurt them most.


For a farm or breeding operation building its first freezing lab, it is the lowest-risk way to reach production-grade output: twenty-year service life, a few thousand dollars, and a workflow that can run entirely inside a refrigerator.


If you are setting up a semen freezing lab or looking for a filling and sealing solution that does not require a trained specialist, contact us for specifications, straw compatibility, and a quotation:

WhatsApp: +86-15236623992

 
 
 

Comments


Want to get the latest updates about Heyi Biotech liquid nitrogen container? Follow us.

  • Whatsapp
  • Whatsapp
  • Instagram
  • Youtube
  • Linkedin
  • Facebook
  • skype

©2021 by HeyiLabs. @No.196 Miandong Road, Yanjin, Xinxiang, China 453200

bottom of page